Local service. Reliable systems. Costs set out on the call. Tamarac HVAC Company handles heating and cooling work for homeowners, landlords, property managers, and commercial clients across Tamarac and the wider Broward County area. Whether the AC stopped working in the middle of July or a heat pump is running but not keeping up, we scope the problem on the call and confirm pricing before anything is scheduled. We are available around the clock, any day of the week, including weekends and holidays. The diagnosis is explained on every call, so you know what you are dealing with before work begins.
Call for a quote: (954) 994-2465
No matter what is going wrong with your heating or cooling, the starting point is always a clear diagnosis. We handle the full range of residential and commercial HVAC work in Tamarac: AC repair and service, heat pump repair and installation, full system replacement, ductwork repair and sealing, thermostat and smart-control installation, indoor air quality, and seasonal maintenance. Homeowners, condo owners, rental property owners, and commercial clients with offices or apartment buildings all call us for the same reason. The work gets scoped before anything is quoted. Reach out and we will work out what it needs.
When the AC stops working or starts blowing warm air, the visit covers a full diagnostic before any parts are discussed. That means checking refrigerant levels and looking for leaks, inspecting the condenser and evaporator coils, and running an airflow assessment to find out whether the problem is the equipment or how air is moving through the system. South Florida homes run their air conditioning harder and longer than almost anywhere else in the country, so the wear patterns here are specific. A system that trips the unit off on a hot afternoon, cycles constantly without cooling the space, or produces warm air at the vents each points to a different cause, and the visit is designed to find which one.
In Tamarac, heat pumps are the practical heating system for most homes. They handle both heating and cooling in a single unit, which makes them the dominant choice across South Florida. When a heat pump stops heating, the visit covers a refrigerant check, an inspection of the reversing valve that switches the system between modes, and a look at the air handler and blower to confirm airflow is reaching the right parts of the home. Gas furnaces exist in the area but are uncommon. If you have one and it needs attention, we can help, but heat pump repair and service is the far more common call here.
At some point, repair stops making sense. A system past its useful life, a compressor that has failed, or a unit still running on a refrigerant type that is no longer manufactured all point toward replacement. We handle central AC replacement, full system replacement, and HVAC installation for new construction. We know this area. We know these systems. Sizing matched to the home. A unit that is oversized for the space short-cycles and leaves humidity problems behind. One that is undersized runs constantly and still cannot keep up. Getting the sizing right is the part of the job that determines how well everything else works, and we handle code-compliant HVAC work on every job.
Leaking ductwork is a common and often overlooked problem in Broward County homes. When supply and return runs have gaps or separations, conditioned air escapes into unconditioned spaces before it reaches the rooms it is meant to cool. The result is uneven temperatures, higher energy use, and in a climate as humid as this one, moisture getting into spaces where it should not be. A duct sealing visit involves pressure testing the system to measure how much air is being lost, locating the gaps, and sealing the supply and return runs. The difference in comfort is usually noticeable within the first cooling cycle after the work is done.
A thermostat that is not reading the temperature correctly, not communicating with the system, or simply failing to hold a schedule causes the whole system to behave erratically. We handle thermostat replacement and smart thermostat installation for homes, condos, and rental properties. A smart thermostat gives a homeowner or landlord remote visibility into what the system is doing, which matters especially for rental units where no one is on-site to notice a problem early.
South Florida's combination of heat, humidity, and limited ventilation creates conditions where mold spores, allergens, and airborne particles accumulate quickly inside a home. Air filtration installation and whole-home air purifier systems address what a standard AC filter cannot. A basic filter catches larger particles but does little for fine particulates or biological matter. Whole-home filtration works within the existing duct system to treat the air moving through the home on every cycle. We assess what the space actually needs before recommending equipment.
A pre-season tune-up covers the things that tend to fail under load: coil cleaning, refrigerant level check, electrical connections on the unit, thermostat calibration, and an airflow test to confirm the system is moving air the way it should. In Tamarac, the practical time for a spring AC tune-up is before the heat builds in earnest, when the system has not been running at full load for months. Permits are handled where the job needs them. Call us and we will walk you through your options.
Comfort problems do not wait, and neither do we. When the AC stops working on a hot afternoon, when the heat pump shuts down overnight, or when the system simply will not come on, we take those calls at any hour. There are no after-hours restrictions here. Emergency no-heat and no-cool calls are taken seriously, and the process is the same at midnight as it is at noon. The problem gets scoped on the phone, the pricing is discussed before anything is scheduled, and the visit is arranged from there. Diagnosed properly. Explained clearly. Priced before the work.
Call for a quote: (954) 994-2465
Tamarac runs on cooling. The climate here means the AC operates most of the year, humidity is a constant factor, and the rare cold snap is handled by the same heat pump that cools the home in summer. The services below come up here more than anywhere else because the conditions that drive them are part of daily life in this area. You are talking to someone who knows the area and the systems in it.
A central AC system removes some humidity as a byproduct of cooling, but it is not designed to control moisture independently. On mild days when the temperature does not call for much cooling, the system may not run long enough to pull meaningful humidity out of the air. A whole-home dehumidifier works alongside the AC, running on its own schedule to keep indoor relative humidity in a range that discourages mold growth and keeps the air comfortable. Installation connects to the existing air handler and duct system. We assess the home's humidity load and size the equipment accordingly. We will get your home comfortable again fast.
Heat pumps are the practical choice for South Florida homes because they handle both heating and cooling without a separate furnace. When it is time to replace an aging system or add cooling to a space that does not have it, a heat pump installation starts with sizing the unit to the space, selecting equipment suited to the local climate, and placing the air handler where it can distribute air evenly. For spaces without existing ductwork, ductless mini-split systems are a direct option. They mount on the wall, connect to an outdoor unit, and require no duct runs. Code-compliant HVAC work applies to every installation we handle.
In a home where the AC runs most of the year, efficiency directly affects the monthly energy bill. Older systems, units running on refrigerants that are no longer in production, and compressors that are failing are all candidates for replacement. A higher SEER-rated unit uses less electricity to move the same amount of cooling through the home, and in Tamarac's climate the difference compounds over a long cooling season. A replacement visit covers a load calculation for the space, equipment selection matched to the home's layout and square footage, installation, and a full system test before the job is complete. Reach out and we will work out what it needs.
Scheduling an HVAC tech should not be complicated. We work with homeowners in single-family homes and condos, landlords managing rental properties, property managers overseeing apartment buildings, and commercial clients in offices and retail spaces. The scope of the call varies, but the process does not. A commercial HVAC call for a multi-unit building involves more equipment and more complexity than a single-family home visit, and we scope it accordingly on the phone before anything is scheduled. New construction HVAC installation is also part of what we handle. Call us and we will walk you through your options.
Here is what most people get wrong about their HVAC system: they assume the cost of a repair is knowable before the system has been looked at. It is not, and any quote given without a diagnostic is a guess. What we can tell you is how the process works. When you call, we scope the job on the phone. That conversation covers what the system is doing, what equipment you have, and what the diagnostic visit involves. The rate for the visit is confirmed before anything is scheduled. After the diagnostic, the findings are explained and the cost of any recommended work is given before the work begins. The diagnosis is explained on every call. Local service. Reliable systems. Costs set out on the call.
Call for a quote: (954) 994-2465
Tamarac is our primary service area, and we work throughout Broward County and the communities around it. Nearby towns we serve regularly include:
If you are just outside this list, call and we will confirm whether we cover your address.
A system that is losing refrigerant repeatedly, struggling to cool the home even on moderate days, or running on a refrigerant type no longer in production is worth evaluating for replacement. Frequent repair calls, rising energy use without a change in habits, and a compressor that has already been replaced once are all signals that the remaining system life may not justify further repair costs. We assess the equipment on the visit and explain the options before recommending a path forward.
A standard AC system removes some moisture as part of the cooling cycle, but it is not designed to control humidity independently. On mild days when the system does not run long enough to pull meaningful moisture from the air, indoor humidity can stay uncomfortably high even when the temperature reads correctly. A whole-home dehumidifier connects to the existing air handler and duct system and runs on its own schedule to keep relative humidity in a range that discourages mold growth and keeps the air comfortable.
A heat pump handles both heating and cooling in a single unit, which suits South Florida's climate well. The winters here are mild enough that a heat pump handles the heating load efficiently without the operating costs of a gas furnace, and the same unit manages cooling through the long summer season. One system covering both functions simplifies the equipment and keeps operating costs in line with what most Broward County homeowners expect.
The visit starts with a load calculation to confirm the right equipment size for the home's square footage and layout. The old condenser unit and evaporator coil are removed, the new system is installed, and the duct condition is checked to confirm it can support the new equipment properly. The system is tested before the job is closed out, and permits are handled where the installation requires them.
The diagnostic covers refrigerant level and signs of a leak, coil condition on both the evaporator and condenser sides, capacitor and compressor function, and airflow through the system. Each of those can produce the same symptom, an AC that runs but does not cool, for a different reason. The assessment narrows it down before any repair is quoted.
A grinding noise often points to a motor bearing that is wearing out. A rattling sound can mean a loose panel, a debris issue in the outdoor unit, or a blower wheel that is out of balance. A clicking noise at startup or shutdown is sometimes normal, but clicking that continues through the cycle can indicate a relay or control board issue. The visit covers a full assessment of what is producing the sound before any repair is recommended.
Uneven temperatures from room to room usually trace back to the duct system, the equipment sizing, or both. A supply run that is undersized, a duct that has separated, or a return that is not pulling enough air from a particular part of the home can all produce the same result. In some cases the issue is an oversized unit that short-cycles before it has time to dehumidify and distribute air evenly. The diagnostic looks at airflow, duct condition, and equipment sizing to identify which factor is at work.
When supply and return ducts have gaps or separations, conditioned air escapes into attics, wall cavities, and unconditioned spaces before it reaches the rooms it is meant to cool. The result is higher energy use, uneven temperatures, and in South Florida's humid climate, moisture getting into spaces where it creates additional problems. A duct sealing visit involves pressure testing the system to measure how much air is being lost and sealing the runs that are contributing to the loss.
The diagnostic fee covers the assessment and the explanation of findings. If a repair is needed, the cost of parts and labor for that work is quoted separately before anything is started. A job that turns out to be more involved than the initial symptom suggested, such as a refrigerant leak that requires a coil replacement rather than a simple recharge, will be explained and repriced before the additional work proceeds. Nothing is added to the scope without your knowledge.
When the assessment points toward replacement, the visit covers a load calculation to confirm the right equipment size, an explanation of the options, and a confirmed price before any work is authorized. The old equipment is removed, the new system is installed, and the ductwork is checked to confirm it can support the replacement unit. Permits are handled where the job requires them.
A burning smell at startup after a long period of non-use can be dust burning off the heat strips, which usually clears quickly. A burning smell that persists or smells electrical points to something inside the unit that needs immediate attention, and the system should be shut off until it is assessed. A musty smell typically indicates mold or mildew growth somewhere in the duct system or on the evaporator coil, which is a common issue in South Florida's humid climate and is addressed through coil cleaning and, in some cases, air filtration upgrades.
Sizing starts with a load calculation based on the home's square footage, layout, insulation, and window exposure. A unit that is too large for the space short-cycles and leaves humidity behind. One that is too small runs constantly and still cannot keep up. Once the right capacity is confirmed, the installation covers placement of the air handler and outdoor unit, the refrigerant line set, and the low-voltage control wiring between them. The system is tested before the job is complete.
The existing thermostat is removed and the wiring at the wall is assessed to confirm compatibility with the new control. A smart thermostat is wired to the air handler and the outdoor unit using the low-voltage control wires already in place, and the system is tested to confirm it is communicating correctly with the equipment. For rental properties, a smart thermostat also gives the owner remote visibility into what the system is doing, which can help catch problems early.
We know this area. We know these systems. Sizing matched to the home. Whether the call is for an emergency repair, a seasonal tune-up, a full system replacement, or a dehumidification install, the process starts the same way: a call, a conversation about what the system is doing, and a price confirmed before anything is scheduled. We are available around the clock, every day of the week, with no restrictions on nights, weekends, or holidays.
Call Tamarac HVAC Company at (954) 994-2465 for a quote.
Every call starts the same way: we scope the job on the phone, explain what the diagnostic covers, and confirm pricing before anything is scheduled. The table below lays out the full range of heating and cooling work we handle in Tamarac and across Broward County, who each service fits best, and a practical note worth knowing before you book. If a service you need is not listed or you are not sure which one applies, call us and we will work out what it needs.
| HVAC Service | Scope of Work | Best Suited For | What to Keep in Mind |
|---|---|---|---|
| Indoor Air Quality & Air Filtration |
| Households dealing with allergens, mold concerns, or air quality problems that a standard filter is not addressing | South Florida's heat and humidity create conditions where mold spores and fine particulates accumulate quickly indoors. A basic filter catches larger particles but does little for biological matter. |
| Heat Pump Repair & Service |
| Tamarac homeowners whose heat pump is running but not heating or cooling the space properly | The reversing valve is the component that switches a heat pump between heating and cooling modes. A failure there produces symptoms that look like a refrigerant problem but require a different fix. |
| Emergency HVAC Service |
| Any situation where the AC has stopped working, the heat pump has shut down, or the system will not come on | Emergency no-heat and no-cool calls are taken seriously. The problem is scoped on the phone and pricing is discussed before the visit is arranged, regardless of the hour. |
| Seasonal Maintenance & Tune-Ups |
| Homeowners who want to catch problems before the peak cooling season rather than during it | In Tamarac, the practical window for a spring tune-up is before the heat builds in earnest, when the system has not yet been running at full load for months. |
| Thermostat Installation & Smart Controls |
| Homeowners, condo owners, and landlords who want better control or remote monitoring of their system | A thermostat that is not reading temperature correctly causes the whole system to behave erratically. Replacing it is often a faster fix than it looks. |
| AC Repair & Service |
| Homeowners and landlords whose AC has stopped cooling or is behaving erratically | South Florida systems run harder and longer than most, so wear patterns here are specific to this climate. The diagnostic narrows the cause before any repair is quoted. |
| Whole-Home Dehumidification & Humidity Control |
| Homeowners whose home feels muggy even when the AC is running, especially on mild days | On mild days when the AC does not run long enough to pull meaningful moisture from the air, indoor humidity stays high even when the temperature reads correctly. A dedicated dehumidifier runs on its own schedule to address that gap. |
| Heating Repair & Service |
| Homes that rely on electric heat strips or auxiliary heating during Broward County cold snaps | True heating calls are less common here than cooling calls, but when temperatures drop overnight, the system still needs to perform. We take those calls at any hour. |
| Heat Pump Installation |
| Homeowners replacing an aging system or adding cooling and heating to a space that does not have it | Heat pumps handle both heating and cooling in a single unit, which suits Broward County's climate well. One system covers both functions without a separate furnace. |
| Ductwork Repair & Sealing |
| Homes with uneven temperatures, higher-than-expected energy use, or humidity problems in specific rooms | In South Florida's humid climate, gaps in ductwork let moisture into unconditioned spaces where it creates additional problems beyond comfort. Sealing addresses both issues at once. |
| High-Efficiency Central AC Replacement |
| Homeowners with older systems, rising energy bills, or units running on refrigerants no longer in production | In a home where the AC runs most of the year, a higher SEER rating compounds savings over a long cooling season. The difference shows up on the monthly energy bill. |
| HVAC System Installation & Replacement |
| Homeowners replacing an aging system, a failed compressor, or a unit running on a discontinued refrigerant | Oversizing is as much a problem as undersizing. A unit too large for the space short-cycles and leaves humidity problems behind, which matters especially in South Florida. |
How do I know whether to repair my AC or replace it entirely?
The decision usually comes down to the age of the equipment, the cost of the repair relative to the value of the system, and whether the unit is still running on a refrigerant type that is in production. A compressor that has already been replaced once, a system that needs refrigerant added repeatedly, or a unit that is struggling to cool the home on moderate days are all signs that the remaining useful life may not justify further repair costs. We assess the equipment on the visit and explain both options before recommending a path forward.
What causes an AC system to short-cycle, and why does it matter in South Florida?
Short-cycling is when the system turns on, runs briefly, and shuts off before completing a full cooling cycle. It usually points to an oversized unit, a refrigerant problem, or a control issue. In South Florida it matters more than in most places because the AC is also doing the work of removing humidity from the air. A system that short-cycles does not run long enough to pull moisture out, so the home stays uncomfortable even when the temperature reads correctly. The diagnostic covers equipment sizing, refrigerant level, and control function to identify which factor is at work.
How often should an HVAC system in Tamarac be serviced?
Once a year is the standard recommendation for most systems, and the practical time here is before the peak cooling season rather than during it. A pre-season tune-up covers the components most likely to fail under load, so problems are caught before the system is running at full demand. If the system is older or has had recurring issues, a mid-season check is worth considering as well.
Diagnosis Explained Before Any Repair
We go over the findings before quoting any repair. You know what the system is doing, what is causing it, and what the fix involves before the work begins.
What are the signs of a refrigerant or airflow problem?
A refrigerant problem often shows up as an AC that runs continuously without cooling the space, ice forming on the evaporator coil, or a hissing sound near the indoor unit. An airflow problem tends to produce uneven temperatures from room to room, weak airflow at the vents, or a system that seems to be working but cannot keep up with the load. Both can produce similar symptoms, which is why the diagnostic covers refrigerant level, coil condition, and airflow before any repair is quoted.
What does a seasonal maintenance visit actually cover?
The visit covers coil cleaning on both the evaporator and condenser sides, a refrigerant level check, an inspection of the electrical connections on the unit, thermostat calibration, and an airflow test to confirm the system is moving air the way it should. The goal is to catch the things that tend to fail under load before the peak season starts, not after the system has been running hard for weeks.
Do I need to be home when the HVAC work is done?
For most visits, yes. The diagnostic and any repair work require access to the equipment, which typically means both the indoor air handler and the outdoor unit. If you are scheduling for a rental property and will not be on-site yourself, let us know when you call so we can confirm the access arrangements before the visit is scheduled.
Code-Compliant Work on Every Job
Permits are handled where the installation requires them. Every job is completed to the standards the local code inspectors enforce, whether it is a repair visit or a full system replacement.
How does a dirty coil or clogged filter affect system performance?
A dirty evaporator coil reduces the system's ability to transfer heat out of the air, which means the AC runs longer and works harder to achieve the same cooling. A clogged filter restricts airflow into the system, which compounds the problem and can cause the coil to ice over. In South Florida's climate, where the system runs most of the year, coil and filter condition matters more than in places where the AC sits idle for months at a time.
What should I know about permits and code compliance for HVAC work in Broward County?
Permit requirements vary depending on the scope of the work and whether the equipment sits on private property or in a location that triggers additional review. Replacement installations and new system installs typically require permits, and we handle that process where the job needs it. Code-compliant work applies to every job we do, and the findings are explained before any work is authorized.
Emergency No-Heat and No-Cool Calls Handled
We take emergency calls at any hour, any day, with no restrictions on nights, weekends, or holidays. The process is the same at midnight as it is at noon.
What are the signs of a failing compressor or blower motor?
A failing compressor often shows up as an AC that runs but does not cool, a unit that trips the breaker repeatedly, or a loud clanking or grinding noise from the outdoor unit. A blower motor issue tends to produce weak or no airflow at the vents even when the system appears to be running. Both are assessed during the diagnostic visit before any repair is recommended, because the symptom alone does not always point to a single cause.
How does indoor humidity get controlled in a Broward County home beyond what the AC already does?
A central AC system removes some humidity as a byproduct of the cooling cycle, but it is not designed to control moisture independently. On mild days when the temperature does not call for much cooling, the system may not run long enough to pull meaningful humidity from the air. A whole-home dehumidifier connects to the existing air handler and duct system and runs on its own schedule, keeping indoor relative humidity in a range that discourages mold growth and keeps the air comfortable regardless of whether the AC is running at full capacity.
How long does a full system replacement typically take?
Most residential system replacements are completed in a single day. The timeline depends on the complexity of the installation, the condition of the existing ductwork, and whether any additional work is needed to prepare the space for the new equipment. We confirm the expected scope and timeline on the call before anything is scheduled.
Call us for a quote and we will scope the job on the phone, explain what the visit covers, and confirm pricing before anything is scheduled.
(954) 994-2465