Anybody can swap a part. The useful work is figuring out why the part failed in the first place, because a capacitor that burns out twice in two years is telling you something the replacement alone will not fix. That is the work we do in Weston: diagnosis first, repair or replacement second, and a clear explanation of the finding before a price is confirmed or a wrench is picked up.
We cover the full range of heating and cooling work for homes, condos, rental properties, and commercial spaces across Weston.
Call (954) 994-2465 and someone who knows the trade answers, scopes the job on the phone, and gives you a rate before anything is scheduled.
From a quick tune-up to a whole-system replacement, the diagnosis comes first. The job types below are the situations we see most often in Weston. Each one is worth understanding on its own terms, because the symptom and the cause are not always the same thing.
The evaporator coil sits inside the air handler and is where the system actually pulls heat out of the air. When it is coated in dust or debris, it cannot transfer heat efficiently, and the system works harder to produce less cooling. A coil that has been running dirty long enough can ice over entirely, which shuts down airflow and sometimes gets mistaken for a refrigerant problem. Cleaning restores the contact surface. If the coil itself is damaged or corroded, replacement is the right call, and we explain the difference on the visit.
Gaps and separations in supply and return runs let conditioned air escape before it reaches the rooms it is meant to cool. In a region where the system runs most of the year, even a modest amount of duct leakage adds up in energy costs and leaves parts of the home consistently uncomfortable. Pressure testing measures how much air the system is actually losing. Sealing closes the gaps without tearing into walls or ceilings.
Short cycling, strange noises and weak airflow each point somewhere different, and so does a home where one room is always five degrees warmer than the rest. The cause might be a duct run that was never sized correctly, a return that is not pulling enough air from that part of the house, or a system that is too large for the space and shuts off before it has finished distributing air evenly. We work through the airflow picture before recommending a fix.
Standing water near the air handler usually means the condensate drain line is blocked. In a climate with high year-round humidity, the drain line handles a significant volume of moisture, and a blockage can back up quickly. Left unaddressed, it causes water damage and creates conditions that promote mold growth inside the unit. The visit covers clearing the line and checking the drain pan and float switch that are supposed to catch the problem before it overflows.
Comfort problems don't wait, and neither do we. Calls are answered at any hour, any day, including nights, weekends, and holidays. There are no closed hours and no after-hours restrictions. If the AC has stopped working entirely, the heat pump is down, or a rental unit has lost cooling in the middle of summer, the call gets treated as urgent from the first ring.
For properties that have to stay occupied or open, we work around what the schedule requires. A business that cannot close for a repair, a tenant who needs advance notice, or a property manager coordinating access across multiple units, all of that gets discussed on the call before the visit is arranged. The scope and the price are confirmed before anything is scheduled, so there are no decisions to make at the door.
Emergency no-heat and no-cool calls taken seriously means the person who answers can talk through the fault, explain what the visit will cover, and confirm the rate before anything is put on the calendar.
A duct system that is losing air is not just an efficiency problem. In a home where the AC runs for most of the year, the losses compound month after month. Rooms that the supply runs never properly reach stay warm regardless of what the thermostat says. The system runs longer cycles trying to hit a setpoint it cannot reach, which puts more wear on the compressor and the blower.
Sealing and repair do not require pulling the house apart. Pressure testing identifies where the losses are concentrated. Most of the work happens at the air handler, at duct connections, and at the points where runs pass through unconditioned spaces. A sealed duct system lets the equipment do what it was sized to do, which often means a noticeably more even temperature across the whole home.
Code-compliant HVAC work on every job applies to ductwork the same as it does to equipment. Where the job requires permits, we handle them.
Scheduling an HVAC tech shouldn't be complicated, and neither should understanding what a job is going to cost. The rate for the diagnostic visit is confirmed on the call before anything is scheduled. After the visit, the findings are explained and the cost of any recommended work is quoted before a repair begins. Nothing is added to the scope without your knowledge.
What moves a quote is straightforward. The fault itself matters: a capacitor replacement is a different job from a compressor replacement. What has to be accessed matters too, because a coil that is easy to reach takes less time than one buried inside a cabinet. And whether a repair makes sense or a replacement is the better answer changes the picture entirely, especially when the system is aging or the repair would cost more than the remaining useful life justifies.
Call us and we'll walk you through your options. The price is confirmed before work begins, every time. The full breakdown is on our HVAC service list.
A high SEER rating on a new unit is a real number, but it describes performance under controlled test conditions. What a property actually sees after installation depends on factors the rating does not account for: how well the equipment is sized to the space, the condition of the duct system carrying the air, and how the thermostat is managing the cycles. An efficient unit connected to leaking ducts in a home it was never properly sized for will not perform the way the spec sheet suggests.
Getting the efficiency out of new equipment means doing the sizing work before the unit is selected, checking the duct system before it is connected to new equipment, and confirming the controls are set up to let the system run the way it was designed. That is the difference between a rating on paper and a utility bill that reflects it.
Some spaces do not have ductwork and were never designed to have it. A converted garage, a sunroom addition, a home office built out of space the original system cannot reach, these are the situations where a ductless mini-split solves a problem that a central system cannot address without significant construction.
A mini-split places the air handler in the room itself, connected by a refrigerant line set to an outdoor unit. There is no duct run to install and no existing duct system to extend. The system conditions the space directly, which also means it can be set independently of the rest of the home. For rental units or commercial spaces where different zones need different temperatures, that independence is often the point.
We handle mini-split installation and repair across Weston. The visit covers sizing the unit to the space, selecting the right equipment for the application, and completing the installation to the standards the local inspectors enforce.
We serve Weston and the surrounding Broward County communities. If your property is in Southwest Ranches, Pembroke Pines, Davie, Cooper City, or Plantation, the same process applies. The call is answered, the job is scoped, and the rate is confirmed before anything is scheduled.
If you are not sure whether your address falls within the area we cover, call and ask. We will confirm it on the spot.
Before the heavy cooling load of summer is the practical answer. Getting the system checked while demand is lower means any issues can be addressed before the unit is running at full capacity day after day. We take maintenance calls year-round, but a pre-season visit is the one most likely to prevent a mid-summer breakdown.
Sizing matters more than most people expect. A unit that is too large for the space short-cycles, which means it shuts off before it has time to dehumidify the air or distribute cooling evenly. A unit that is too small runs continuously and still cannot keep up. We do a load calculation before recommending equipment, so the system is matched to the actual space rather than selected on price or brand alone.
Yes. We work around tenant schedules and property manager access requirements regularly. The scope and the price are confirmed on the call before the visit is arranged, so you know what is happening and when before anyone shows up at the property. If a tenant needs advance notice or the visit needs to be coordinated across multiple units, that gets discussed on the call.
It depends on what is needed. A multi-unit property where every system needs a seasonal tune-up can often be handled in a single visit. If different units need different work, we scope each one separately and explain the cost for each before anything is started.
The most common calls involve AC systems that are running but not cooling effectively, water pooling near the air handler from a blocked condensate drain, and uneven temperatures between rooms that trace back to duct issues or an oversized unit. Humidity control is a recurring concern as well, since the regional climate puts a load on standard AC systems that cooling alone does not always resolve.
Yes. If the job is a filter replacement, a thermostat swap, or a similar small item, we can schedule a visit for that work on its own. Describe what you need when you call and we will confirm what the visit covers and what it costs.
Yes. A noise that was not there before is the system telling you something has changed. Grinding, rattling, squealing, and persistent clicking each point in different directions, and identifying the source early is usually less disruptive than waiting until the component fails completely.
We run the system through its cycle during the visit and observe how it behaves under load. A fault that only emerges after extended operation often points at a component that is failing thermally, such as a capacitor or a motor winding that breaks down as it heats up. Describing the pattern when you call helps us prepare for that kind of assessment.
A property that runs warm in certain rooms, cycles constantly without ever quite hitting the setpoint, or costs noticeably more to cool than it used to is telling you something. The fault might be in the equipment, in the duct system, in how the controls are managing the cycles, or in some combination of all three. The only way to know is a proper diagnosis.
Call (954) 994-2465.
Someone who knows the trade answers, asks about the system and what it is doing, and gives you a rate before anything is put on the schedule. We are available around the clock, any day of the week. Call Tamarac HVAC Company and we will work out what it needs.
We also take heating and cooling work in: Pembroke Pines, Davie, Cooper City, Plantation, Miramar.
Every call starts the same way: we scope the job on the phone, explain what the diagnostic covers, and confirm pricing before anything is scheduled. The table below lays out the full range of heating and cooling work we handle in Weston and across Broward County, who each service fits best, and a practical note worth knowing before you book. If a service you need is not listed or you are not sure which one applies, call us and we will work out what it needs.
| HVAC Service | Scope of Work | Best Suited For | What to Keep in Mind |
|---|---|---|---|
| Thermostat Installation & Smart Controls |
| Homeowners, condo owners, and landlords who want better control or remote monitoring of their system | A thermostat that is not reading temperature correctly causes the whole system to behave erratically. Replacing it is often a faster fix than it looks. |
| Heat Pump Installation |
| Homeowners replacing an aging system or adding cooling and heating to a space that does not have it | Heat pumps handle both heating and cooling in a single unit, which suits Broward County's climate well. One system covers both functions without a separate furnace. |
| HVAC System Installation & Replacement |
| Homeowners replacing an aging system, a failed compressor, or a unit running on a discontinued refrigerant | Oversizing is as much a problem as undersizing. A unit too large for the space short-cycles and leaves humidity problems behind, which matters especially in South Florida. |
Call us for a quote and we will scope the job on the phone, explain what the visit covers, and confirm pricing before anything is scheduled.
(954) 994-2465